Condition Monitoring Devices For The Marine And Aviation Industries

Only with condition monitoring can a plant worker see the true health of the components. The process of observing oil and grease residues for potential wear and tear, damage and other problems is vital in cases such as marine engines. It is easy to lift the lid on a household generator and see how its general health is, but in commercial enterprises these might be less accessible for engineers. This is why a new approach has to be taken to ensure the systems are all working as they should be.

Condition monitoring refers to the use of real-time or sample testing methods. Sensors can be fitted to mainline fluid channels so that the state of the passing elements is constantly observed. When using sensors it is common to also have alarms that can send messages straight to the engineer on duty. When interruption or machinery failure is not an option this is the best defense against it.

There are other scenarios where this kind of monitoring is not just helpful for the protection of the machinery, but can also be important in preserving life. Jet engines are often rigged with sensors to carefully examine emissions, temperature and performance in-flight. These condition monitoring processes are relied on heavily to provide real time data about the condition of the vital parts of the flight hardware. If an alarm is to be set off, it can save pilots and engineers precious seconds in getting the plane to a safe position to perform emergency maintenance.

There are other ways to employ condition monitoring in less time-critical usages. It is just as useful to gauge the quality of substances and check the health of non-vital machines. It is good business practice to thoroughly test ship fuel for its grade, as well as checking before mixing fuel, and there are kits available to do this. Monitoring in this way helps lower costs through excess waste and contamination, and provides a simple-to-use method. It is also a way of having suitable testing facilities on-site at all times without having to employ a workforce to run it.

Companies have varying budgets, and these will have a lot to do with choosing the right monitoring solution. When time is of the essence, only the most recent procedures will be cost effective. Functions for quality control will perform better and make better budget sense when monitored with kits and labs. It all relies on the machinery, and also the requirements of the business.


----------------------------------------------------
Optimizing machine performance decreases repair and maintenance costs. One of the most important testing methods that can be used is Kittiwake Monitoring Innovation, as it can be useful in reducing downtime of the machinery. A different side of this issue can be discussed, www.kittiwake.com.
http://www.kittiwake.com/


EasyPublish this article: http://submityourarticle.com/articles/easypublish.php?art_id=282163