Electrical isolation is a procedure which allows all hazardous items to be contained and taken care of before work can commence. Sometimes a system can have problems and appear dead or not work. This doesn't mean that the situation isn't still dangerous for a person, as the system can still be live and cause death The steps in an electrical isolation procedure must be followed with care when looking at an electrical permit-to-work if a person is to be safe.
The world has many dangerous machines that are in operation with factories and other installations. When these machines need to be worked on, these machines must be turned off to be safe. The purpose of the Electrical Isolation Procedure is make sure that the dangerous items are turned off so people and workers won't become hurt.
The first step is to break the circuit and stop the flow of energy going through the system. This will make it easy for the worker as they navigate the system. Many of the circuits or harmful switches will have locks placed on them to make sure that they are secure. These locks can not be unlocked unless it is by the person who placed them there. The best way to test a system is to make sure to follow all of the procedures.
When a contractor comes in and they have a electrical permit-to-work, they must go through the procedures of making sure that everything is secure in the area. They must also follow the Electricity at Work Regulations 1989 and adhere to safety practices that allow the worker to do their job without issues or fear of death.
The best way to make sure that the work is done with safety in mind is to consider the aspects of safe systems of work. All people must be protected to make sure that no one is hurt. The group must understand the dynamics of the situation and secure their lockout tagout (LOTO). All items will be marked with a red tag to show that the switch should not be turned and is locked and secure from causing harm.
The steps are to secure the safety of the building and lock it down after it is done. The closing down of factories must be done with a careful procedure to allow the machines to safely to be repaired and to be put back on when it is time to open. The skipping of any of these steps can open the door for dangerous situations to occur. The best thing for a person to do is to make sure that all procedures are followed.
In the steps that must be followed, a person must come to understand the importance behind these steps. The important thing is to be able to keep everyone safe when they are working around these types of dangerous settings. This is why certain procedures must be followed like in a group lockout.
The use of electrical isolation procedure is smart as it can help workers to remain safe around dangerous equipment. The important thing is that the tags are placed and the rules of the National Electric code are followed. Red tags need to show the danger spots on a machine.
----------------------------------------------------
Ted Boynton (BSc Hons., NEBOSH) is the General Manager of Lockout Tagout Safety Ltd., a company based in industrial Teesside UK. Lockout Tagout is a popular provider of quality lockout tagout equipment to UK and world markets. Go now to http://www.lockout-tagout.co.uk or call 01642 888002 for further news and LOTO tips including expert advice on choosing padlocks for industrial safety programmes, or to browse our full range of safety products.
EasyPublish this article: http://submityourarticle.com/articles/easypublish.php?art_id=240591
No comments:
Post a Comment